| 扫描仪面框注塑件翘曲变形的模拟分析 |
| |
| 引用本文： | 王雷刚,倪雪峰,黄瑶. 扫描仪面框注塑件翘曲变形的模拟分析[J]. 现代塑料加工应用, 2006, 18(4): 41-43 |
| |
| 作者姓名： | 王雷刚 倪雪峰 黄瑶 |
| |
| 作者单位： | 江苏大学材料科学与工程学院,江苏,镇江,212013 |
| |
| 摘 要： | 以扫描仪面框薄壁件注塑成型为例，应用Moldflow软件分析了模具温度、熔体温度、浇口位置和保压参数对翘曲变形的影响规律，提出了减小翘曲变形的工艺措施，分析结果与生产实际吻合。
|
| 关 键 词： | 注射成型 翘曲变形 模拟分析 计算机软件 丙烯腈-丁二烯-苯乙烯共聚物 |
| 收稿时间： | 2005-11-30 |
| 修稿时间： | 2006-03-18 |
Simulation of Warpage on Injection Molded Part of Scanner Panel |
| |
| Wang Leigang,Ni Xuefeng,Huang Yao. Simulation of Warpage on Injection Molded Part of Scanner Panel[J]. Modern Plastics Processing and Applications, 2006, 18(4): 41-43 |
| |
| Authors: | Wang Leigang Ni Xuefeng Huang Yao |
| |
| Affiliation: | School of Materials Science and Engineering, Jiangsu University, Zhenjiang,Jiangsu,212013 |
| |
| Abstract: | Giving example of injection molding of scanner panel,by using the commercial software Moldflow to simulate injection process of the scanner panel, the effect rules of mold temperature, melt temperature, gate location and packing parameter to the warpage of the thin shell product are analyzed. A acceptable improved method to reduce the warpage is put forward. The simulation agrees with the real practice production. |
| |
| Keywords: | injection molding warpage simulation computer software acrylonitril-butadiene-styrene copolymer |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
