| 冷硬铸铁轧辊成型硬质合金铣刀的研究 |
| |
| 引用本文： | 张端乐.冷硬铸铁轧辊成型硬质合金铣刀的研究[J].硬质合金,1995,12(2):107-110. |
| |
| 作者姓名： | 张端乐 |
| |
| 作者单位： | 江苏象牌机械有限公司!江苏省苏州市215004 |
| |
| 摘 要： | 热轧花纹板的冷硬铸铁轧辊表面密布半圆形槽腔，是典型的难加工零件，此文介绍了采用硬质合金铣刀进行切削加工的成功经验。
|
| 关 键 词： | 冷硬铸铁 轧辊 热轧花纹板 槽腔 铣切 |
RESEARCH OF CEMENTED CARBIDE MILL FOR FORMING OF COLD HARDEN CAST IRON ROLL |
| |
| Zhang Duanle.RESEARCH OF CEMENTED CARBIDE MILL FOR FORMING OF COLD HARDEN CAST IRON ROLL[J].Cemented Carbide,1995,12(2):107-110. |
| |
| Authors: | Zhang Duanle |
| |
| Abstract: | The cold harden cast iron roll for hot - rolled plate with streaking , the hall- round grooves are highly concentrated distribution on their surface, it is typical difficult-cutting workpiece,This paper introduces the successful experience of cutting formation by cemented carbide mill. |
| |
| Keywords: | Cold Harden Cast Iron Roll Hot-Rolled Plate with Streaking Groove Mill |
| 本文献已被 CNKI 维普 等数据库收录！ |
