首页 | 本学科首页   官方微博 | 高级检索  
     

模孔偏置位置参数对型材挤压成形影响的数值研究
引用本文:闫洪,夏巨谌,胡国安,杨国泰,何成宏.模孔偏置位置参数对型材挤压成形影响的数值研究[J].中国机械工程,2003,14(23):2002-2006.
作者姓名:闫洪  夏巨谌  胡国安  杨国泰  何成宏
作者单位:1. 南昌大学机电学院,南昌市,330029
2. 华中科技大学塑性成形及模具技术国家重点实验室
基金项目:江西省自然科学基金资助项目(0350005),华中科技大学塑性成形及模具技术国家重点实验室开放基金资助项目(02—6)
摘    要:通过引进流速均方差作为评价塑形变形时金属流动速度不均衡性指标,来有效地控制型材挤压成形时金属流动的不均匀性。通过采用有限变形弹塑性有限元方法,对不同模孔偏置位置参数下型材挤压过程进行了数值模拟研究,获得了挤压力、流速均方差和型材件内部应力应变场随其变化的规律,为进一步实现型材挤压工艺参数优化提供了理论参考。

关 键 词:流速均方差  型材挤压  模孔偏置位置  弹塑性有限元法  数值研究
文章编号:1004-132X(2003)23-2002-05

Numerical Simulation of Effect of Die Hole Eccentric Position on Profile Extrusion Forming Process
Yan Hong,Xia Juchen,Hu Guoan,Yang Guotai Nanchang University,Nanchang,China.Numerical Simulation of Effect of Die Hole Eccentric Position on Profile Extrusion Forming Process[J].China Mechanical Engineering,2003,14(23):2002-2006.
Authors:Yan Hong  Xia Juchen  Hu Guoan  Yang Guotai Nanchang University  Nanchang  China
Abstract:The non--homogeneous metal flow duringthe extrusion forming process was well controlled by im-posing a reflecting non--equilibrium parameter of metalflow, the mean--square deviation of velocity(SDV). Theelastoplastic finite element method of finite deformationwas used to carry out the numerical simulation for theprofile extrusion process with different die hole eccentricpositions. The varied laws of extrusion pressure, SDVand stress--strain fields with the extrusion parametersare obtained. It is theoretical consideration to optimizethe technological parameters of the profile extrusion.
Keywords:mean-square deviation of velocity  profile extrusion  die hole eccentric position  elastoplastic finite element method
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号