| 玻纤增强聚氨酯泡沫的研制 |
| |
| 引用本文： | 魏建国,马端人,柳佳,胡俊. 玻纤增强聚氨酯泡沫的研制[J]. 聚氨酯工业, 2020, 35(1): 33-35. DOI: 10.3969/j.issn.1005-1902.2020.01.010 |
| |
| 作者姓名： | 魏建国 马端人 柳佳 胡俊 |
| |
| 作者单位： | 洛阳科博思新材料科技有限公司 河南洛阳 471000 |
| |
| 摘 要： | 制备了长玻璃纤维增强硬质聚氨酯泡沫复合材料。研究了发泡剂水和HCFC-141b对纯泡沫内部温度的影响,以及玻纤增强复合材料体系的固化时间和异氰酸酯指数(R值)对其力学性能的影响。结果表明,以HCFC-141b为发泡剂的体系放热量比水作发泡剂的放热量低,体系达到的最高温度较低。当异氰酸酯指数为1.05时,玻纤增强聚氨酯硬泡有较高的压缩强度,达到83.3 MPa。
|
| 关 键 词： | 硬质聚氨酯泡沫塑料 复合材料 玻璃纤维增强 |
Development of Long Glass Fiber Reinforced Polyurethane Foam Composite |
| |
| WEI Jianguo,MA Duanren,LIU Jia,HU Jun. Development of Long Glass Fiber Reinforced Polyurethane Foam Composite[J]. Polyurethane Industry, 2020, 35(1): 33-35. DOI: 10.3969/j.issn.1005-1902.2020.01.010 |
| |
| Authors: | WEI Jianguo MA Duanren LIU Jia HU Jun |
| |
| Affiliation: | (Luoyang CBS New Material Technology Co.Ltd,Luoyang 471600,Henan,China) |
| |
| Abstract: | Long glass fiber reinforced rigid polyurethane foam composite was prepared.The effect of blowing agent water and HCFC-141b on the inner temperature of rigid foam was studied.The effects of curing time and isocyanate index(R value)on mechanical properties of glass fiber reinforced foam composite were studied.The results showed that the heat release of HCFC-141b blown system was lower than that of water blown foam,so the highest temperature was lower.The composite had higher compression strength of 83.3 MPa when R value was 1.05. |
| |
| Keywords: | rigid polyurethane foam composite glass fiber reinforced |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
