首页 | 本学科首页   官方微博 | 高级检索  
     

二硫化钼/热塑性聚氨酯弹性体复合材料性能研究
引用本文:鲍志强,吴斌,黄兴,张楠. 二硫化钼/热塑性聚氨酯弹性体复合材料性能研究[J]. 聚氨酯工业, 2020, 35(3): 12-15. DOI: 10.3969/j.issn.1005-1902.2020.03.004
作者姓名:鲍志强  吴斌  黄兴  张楠
作者单位:广州机械科学研究院有限公司 广东广州 510700;广州机械科学研究院有限公司 广东广州 510700;广州机械科学研究院有限公司 广东广州 510700;广州机械科学研究院有限公司 广东广州 510700
基金项目:2018年国家重点研发计划专项
摘    要:以聚四氢呋喃二醇(PTMEG)、4,4′-二苯基甲烷二异氰酸酯(MDI)和1,4-丁二醇(BDO)为原料,二硫化钼(MoS 2)为改性添加剂,制备了MoS 2/TPU复合材料。研究了MoS 2添加工艺和用量对复合材料性能的影响。结果表明,MoS 2先添加至PTMEG中再制备的复合材料具有更佳的力学性能;随着MoS 2用量的增加,材料的硬度、100%定伸模量增加,拉伸强度和断裂伸长率下降,耐热老化、耐水解和耐液压油性能提高,阿克隆磨耗增加,摩擦系数降低。

关 键 词:热塑性聚氨酯弹性体  二硫化钼  耐老化性能  摩擦磨损

Study on Properties of MoS 2/TPU Composites
BAO Zhiqiang,WU Bin,HUANG Xing,ZHANG Nan. Study on Properties of MoS 2/TPU Composites[J]. Polyurethane Industry, 2020, 35(3): 12-15. DOI: 10.3969/j.issn.1005-1902.2020.03.004
Authors:BAO Zhiqiang  WU Bin  HUANG Xing  ZHANG Nan
Affiliation:(Guangzhou Mechanical Engineering Research Institute Co.Ltd,Guangzhou 510700,Guangdong,China)
Abstract:MoS 2/TPU composites were prepared by using polytetrahydrofuran ether diol(PTMEG),4,4′-diphenylmethane diisocyanate(MDI)and 1,4-butanediol(BDO)as raw materials and molybdenum disulfide(MoS 2)as modified additive.The effects of MoS 2 addition process and amount on the properties of the composites were studied.The results showed that the composites prepared by adding MoS 2 directly to oligomer diol had the best physical and mechanical properties.With the increase of the mass content of MoS 2,the hardness and 100%constant tensile strength of the composites were increased,the tensile strength and elongation at break were decreased,meanwhile the heat-resistant air aging ability,the hydrolysis resistance and the hydraulic oil resistance of the composite material were improved,the Akron abrasion was increased,and the friction factor was decreased.
Keywords:thermoplastic polyurethane elastomer  molybdenum disulfide  ageing-resistant performance  friction and wear
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号