首页 | 本学科首页   官方微博 | 高级检索  
     

不同Boot Loader之间模块移植的实现
引用本文:李维,朱昀,马晓川.不同Boot Loader之间模块移植的实现[J].微计算机信息,2007,23(32):17-19.
作者姓名:李维  朱昀  马晓川
作者单位:100080,北京 中国科学院声学研究所
基金项目:十一五国防预研项目(编号不公开)
摘    要:在嵌入式系统开发中.针对不同硬件对Boot Loader进行修改是重点和难点之一。通常的方法是根据硬件的数据手册编写相关程序;但这样做难度大,开发周期长。本文以RedBoot与U—Boot之间模块移植的实现为例,提出了从不同的Boot Loader中移植已有模块来修改Boot Loader的方法,既降低开发难度,也缩短了开发周期,同时也为众多嵌入式开发人员提供了新的思路。

关 键 词:嵌入式开发  Boot  Loader  RedBoot  U—Boot
文章编号:1008-0570(2007)11-2-0017-03
修稿时间:2007-08-23

Implement of Porting Program Modules between Different Boot Loaders
LI WEI,ZHU YUN,MA XIAOCHUAN.Implement of Porting Program Modules between Different Boot Loaders[J].Control & Automation,2007,23(32):17-19.
Authors:LI WEI  ZHU YUN  MA XIAOCHUAN
Affiliation:Institute of Acoustic, Chinese Academy of Sciences, Beijing, China, 100080
Abstract:It is essential and difficult to modify the Boot loader program for different hardware during the embedded development. The method generally used is to program according to the corresponding datasheets of the hardware which is complicated and time-consuming. This paper, basing on porting program modules between Redboot and U-Boot, introduces a new way porting program modules between Boot loaders to modify the Boot Loaders. It simplifies the work, shortens the developing cycle and brings inspiration to developers.
Keywords:Embedded Development  Boot Loader  RedBoot  U-Boot
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号