| 电磁搅拌制备TiB_2颗粒增强7055铝基复合材料的研究 |
| |
| 引用本文： | 徐萌,陈刚,赵玉涛,彭蕾,吴志峰,王国路,黄康.电磁搅拌制备TiB_2颗粒增强7055铝基复合材料的研究[J].铸造,2009,58(12). |
| |
| 作者姓名： | 徐萌 陈刚 赵玉涛 彭蕾 吴志峰 王国路 黄康 |
| |
| 作者单位： | 江苏大学材料科学与工程学院,江苏镇江,212013 |
| |
| 基金项目： | 国家高技术研究发展计划(863计划)，江苏省教育厅自然科学基础研究项目，江苏省成果转化资金项目 |
| |
| 摘 要： | 在电磁搅拌的条件下,通过盐-熔体原位反应生成了亚微米级TiB_2增强颗粒,并在熔体凝固过程中施加电磁搅拌,获得TiB_2颗粒增强的7055基复合材料铸态组织.试验结果表明,电磁搅拌作用下,熔体的传热和传质速度增加,铝液与反应盐的接触面积也增大,TiB_2颗粒的生成量大大提高,并促进了颗粒在基体中的弥散分布,减少了颗粒的团聚;同时,在熔体凝固过程中施加电磁搅拌,提高了基体材料的致密度,细化了基体晶粒尺寸.
|
| 关 键 词： | 电磁搅拌 原位反应 复合材料 |
Investigation of In-Situ Prepared TiB_2/7055 Aluminium Matrix Composite Under Electromagnetic Stirring |
| |
| XU Meng,CHEN Gang,ZHAO Yu-tao,PENG Lei,WU Zhi-feng,WANG Guo-lu,HUANG Kang.Investigation of In-Situ Prepared TiB_2/7055 Aluminium Matrix Composite Under Electromagnetic Stirring[J].Foundry,2009,58(12). |
| |
| Authors: | XU Meng CHEN Gang ZHAO Yu-tao PENG Lei WU Zhi-feng WANG Guo-lu HUANG Kang |
| |
| Abstract: | Under conditions of electromagnetic stirring, sub-micron TiB_2 particles were prepared by salt-melt reaction, besides, in the process of solidification, electromagnetic stirring was also introduced to obtain TiB_2 particle reinforced 7055 aluminium matrix composite cast structure. The result indicates that under conditions of electromagnetic stirring, the speed of thermal transmission and mass transmission in melt is improved, the contact area of aluminium melt and salt is enhanced and the number of TiB_2 is also largely increased electromagnetic stirring also promotes particles dispersion, meanwhile, electromagnetic stirring in the process of solidification can decrease component segregation and gain finer grain. |
| |
| Keywords: | TiB_2 electromagnetic stirring TiB_2 in-situ composite |
| 本文献已被 万方数据 等数据库收录！ |
|
