首页 | 本学科首页   官方微博 | 高级检索  
     

二倍频调制对开环光纤陀螺工作特性的影响
引用本文:尹国路.二倍频调制对开环光纤陀螺工作特性的影响[J].光电子.激光,2010(11):1645-1649.
作者姓名:尹国路
作者单位:北京交通大学光波技术研究所全光网络与现代通信网教育部重点实验室;
基金项目:国家自然科学基金资助项目(60977033)
摘    要:开环光纤陀螺(FOG)常使用压电陶瓷(PZT)实现非互易性相位偏置,但相位调制中的非线性会造成工作点不稳定和Sagnac相位解调误差。本文对PZT二倍频调制和相位延迟导致的寄生调制信号进行了理论分析,进而提出在小角度Sagnac相移输入时利用二、四次谐波监控工作点,在Sagnac相移逐渐变大时利用一、三次谐波监控工作点;同时对比了相位延迟角为0°和90°所引起的工作点不稳定,采用较大相位延迟角可将工作点绝对误差降低到10-5水平,相位解调误差降低到10-5rad水平。

关 键 词:开环光纤陀螺(FOG)  二倍频相位调制  工作点  相位误差

Influence of second harmonic modulation on operation characteristics of an open-loop fiber optic gyroscope
YIN Guo-lu.Influence of second harmonic modulation on operation characteristics of an open-loop fiber optic gyroscope[J].Journal of Optoelectronics·laser,2010(11):1645-1649.
Authors:YIN Guo-lu
Affiliation:YIN Guo-lu,LOU Shu-qin,TANG Zun-wei(Key Lab.of All Optical Network & Advanced Telecommunication Network of EMC,Institute of Lightwave Technology,Beijing Jiaotong University,Beijing 100044,China)
Abstract:The piezoelectric transducer(PZT) is often used to provide unreciprocal phase modulation in an open-loop fiber optic gyroscope(FOG), but the non-linearities can affect the stability of work point and induce the Saganc phase error.In this paper, the spurious modulation signal output caused by the second harmonic phase modulation and phase delay is analyzed in theory.Numerical results demonstrate that it would be better choose the second and fourth harmonic components for the small Sagnac phase, while the fir...
Keywords:open-loop fiber optic gyroscope(FOG)  second harmonic phase modulation  work point  phase error  
本文献已被 CNKI 等数据库收录!
点击此处可从《光电子.激光》浏览原始摘要信息
点击此处可从《光电子.激光》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号