The effect of surface treatments on the adhesion of electrochemically deposited hydroxyapatite coating to titanium and on its interaction with cells and bacteria

The effect of different mechanical and chemical pre-treatments on the adhesion strength of hydroxyapatite (HAp) coating on a commercially pure titanium (CP-Ti) substrate was studied by means of a standard tensile test followed by microscopic and chemical analysis to determine the locus of fracture. In addition, the effects of either these pre-treatments or post-treatment by low-energy electron irradiation, which allowed tuning the wettability of the surface, on both osteoblast progenitor attachment and S. aureus bacteria attachment were investigated. A dedicated program was developed for unambiguous identification and count of stained cells. A single-phase HAp coating was formed by electrodeposition. A series of surface pre-treatments consisted of grinding down to P1000, etching in HNO₃/HF solution, grit blast, soaking in NaOH and subsequent heat treatment provided the highest adhesion strength to the HAp coating. Osteoblast progenitors derived from rats may be attached preferentially to a hydrophilic surface (post-treatment to θ = 30°), while the bacteria seemed to be less attached to hydrophobic surfaces (post-treatment to θ = 105°). However, the results were not statistically different. The bacteria seemed to be less attached to the smoother, uncoated surfaces.