Institute of Applied Thermodynamics and Fluid Dynamics, University of Applied Sciences Mannheim, Windeckstrasse 110, D-68163 Mannheim, Germany
Abstract:
In a great number of measurements the influence of a disturbed flow on the flow coefficient of a standard orifice plate was investigated. Single bends and double bends out of plane with and without spacer tubes were used as typical disturbances. Experiments were also performed using a combination with a star-shaped flow straightener. The necessary correction factors of the flow coefficient were determined for upstream straight length shorter than detailed in ISO 5167. The flow velocity profiles produced by the disturbances were examined and on this basis profile numbers were calculated. The examinations presented here show that the existing standard should be revised as regards the definition of the fully developed turbulent flow profile and the selection of the required upstream straight lengths.