| 基于PLC的轴承强化研磨机控制系统设计 |
| |
| 引用本文： | 萧金瑞,刘晓初,梁忠伟,刘长红,唐睿智. 基于PLC的轴承强化研磨机控制系统设计[J]. 机床与液压, 2017, 45(16): 148-151. DOI: 10.3969/j.issn.1001-3881.2017.16.038 |
| |
| 作者姓名： | 萧金瑞 刘晓初 梁忠伟 刘长红 唐睿智 |
| |
| 作者单位： | 1. 广州大学机械与电气工程学院, 广东广州510006;广州大学广州市金属材料强化研磨高性能加工重点实验室, 广东广州510006;2. 广州大学机械与电气工程学院,广东广州,510006 |
| |
| 基金项目： | 国家自然科学基金-广东联合基金重点项目，国家星火计划项目，广东省科技计划项目，广东省研究生教育创新计划项目，广州教育系统创新学术团队项目，广州市工业转型升级专项资金项目 |
| |
| 摘 要： | 针对第一代强化研磨设备安全性能较差、加工效率较低、自动化程度不高等问题,设计基于S7-200smart PLC的轴承强化研磨机控制系统。该系统由输入层、CPU处理层和动作执行层组成,可实现复杂环境下的可靠控制,满足了轴承强化研磨机的功能要求,易于操作、界面友好、效果良好,为轴承套圈沟道强化加工提供了较好的解决方案。
|
| 关 键 词： | PLC 强化研磨机 控制系统 |
Design of Bearing Reinforced Grinding Machine Control System Based on PLC |
| |
| XIAO Jinrui,LIU Xiaochu,LIANG Zhongwei,LIU Changhong,TANG Ruizhi. Design of Bearing Reinforced Grinding Machine Control System Based on PLC[J]. Machine Tool & Hydraulics, 2017, 45(16): 148-151. DOI: 10.3969/j.issn.1001-3881.2017.16.038 |
| |
| Authors: | XIAO Jinrui LIU Xiaochu LIANG Zhongwei LIU Changhong TANG Ruizhi |
| |
| Abstract: | Aiming at the problems of poor safety performance , low machining efficiency and low automation level of first genera-tion reinforced grinding equipment , a bearing reinforced grinding machine control system based on PLC was designed .The system con-sisted of input layer , CPU processing layer and action execution layer .Reliable control could be realized under complicated environ-ment and the requirement of bearing reinforced grinding machine could be satisfied with the control system .Furthermore , the system was easy to operate with friendly interface and good results could be gained , and a good solution was provided for bearing ring channel reinforced grinding . |
| |
| Keywords: | PLC Reinforced grinding machine Control system |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《机床与液压》浏览原始摘要信息 |
|
点击此处可从《机床与液压》下载全文 |
|
