| 基于AMESim与ADAMS高频破碎器的振动系统建模与仿真 |
| |
| 引用本文： | 丁成波,蔡家斌,刘文,王新旺. 基于AMESim与ADAMS高频破碎器的振动系统建模与仿真[J]. 机床与液压, 2017, 45(14): 81-85. DOI: 10.3969/j.issn.1001-3881.2017.14.023 |
| |
| 作者姓名： | 丁成波 蔡家斌 刘文 王新旺 |
| |
| 作者单位： | 贵州大学机械工程学院,贵州贵阳,550025 |
| |
| 基金项目： | 贵州大学创新基金，面向智能装备领域的"技术众筹"研究生创新基地 |
| |
| 摘 要： | 以高频破碎器为研究对象,对高频破碎器的结构及工作原理进行分析从而建立数学模型;利用MATLAB对其进行求解并运用AMESim软件对高频破碎器的振动系统进行建模和仿真分析,得出液压马达输出转速对高频破碎器的打击频率及打击速度的影响规律;通过ADAMS对高频破碎器进行建模和仿真,结果表明:仿真模型工作状态与高频破碎器在AMESim软件上运行情况和实际运行情况均相符,从而验证了数学模型的正确性。这为高频破碎器的设计提供了一种新的理论依据和方法。
|
| 关 键 词： | 高频破碎器 振动系统 AMESim ADAMS 建模与仿真 |
Modeling and Simulation of Vibration System of High Frequency Hammer Based on AMESim and ADAMS |
| |
| DING Chengbo,CAI Jiabin,LIU Wen,WANG Xinwang. Modeling and Simulation of Vibration System of High Frequency Hammer Based on AMESim and ADAMS[J]. Machine Tool & Hydraulics, 2017, 45(14): 81-85. DOI: 10.3969/j.issn.1001-3881.2017.14.023 |
| |
| Authors: | DING Chengbo CAI Jiabin LIU Wen WANG Xinwang |
| |
| Abstract: | Taking high frequency hammer as research object, firstly, a mathematical model was established by the analysis of the structure and operational principle of high frequency hammer.Secondly, the influential rules of the hydraulic pressure motor''s output speed on the impact frequency and velocity were obtained by using MATLAB to solve it and using AMESim software to model and simulate the vibration system of high frequency hammer.Finally, modeling and simulating high frequency hammer were achieved by ADAMS, which displayed that the working condition of simulation model accorded with the running situation on AMESim software and the real running situation of high frequency hammer.So the correctness of the mathematical model is verified.It provides new bases and methods for the research on high frequency hammer''s design. |
| |
| Keywords: | High frequency hammer Vibration system AMESim ADAMS Modeling and simulation |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《机床与液压》浏览原始摘要信息 |
|
点击此处可从《机床与液压》下载全文 |
|
