| 屏蔽门上导轨支撑结构的设计与力学分析 |
| |
| 引用本文： | 周明帅,宋玲,李天匀,雷体新,朱翔. 屏蔽门上导轨支撑结构的设计与力学分析[J]. 武钢技术, 2013, 0(6): 35-38 |
| |
| 作者姓名： | 周明帅 宋玲 李天匀 雷体新 朱翔 |
| |
| 作者单位： | [1]华中科技大学船舶与海洋工程学院,湖北武汉430074 [2]武钢制造部,湖北武汉430083 |
| |
| 摘 要： | 提出一种屏蔽门上导轨支撑结构的具体设计方案,利用ANSYS软件建立有限元模型,对屏蔽门结构进行力学分析。选取6个典型工况进行应力强度和变形计算,并将计算结果进行分析。分析结果表明,该屏蔽门上导轨支撑结构满足相应规范要求。该研究结果已用于某屏蔽门上导轨支撑结构的设计中。
|
| 关 键 词： | 钢结构 屏蔽门 有限元 力学分析 |
The design of the upper supporting device on a shielding door and the mechanical analysis of the whole device |
| |
| ZHOU Ming-shuai,SONG Ling,LI Tian-yun,LEI Ti-xin,ZHU Xiang. The design of the upper supporting device on a shielding door and the mechanical analysis of the whole device[J]. Wisco Technology, 2013, 0(6): 35-38 |
| |
| Authors: | ZHOU Ming-shuai SONG Ling LI Tian-yun LEI Ti-xin ZHU Xiang |
| |
| Affiliation: | 1 School of Naval Architecture and Ocean Engineering of HUST, Wuhan 430074,China; 2 Manufacture Department of WISCO,Wuhan 430083,China) |
| |
| Abstract: | This paper proposeed a concrete design scheme for the upper supporting device on the shielding door.ANSYS software was applied to build the finite element model. Six typical conditions were picked to calculate and analyzed the strength and deformation.The results showed that the mechanical properties of this device met the specification requirements.The results of the research have been used to design an upper supporting device on the shielding door. |
| |
| Keywords: | steel structure shielding door finite element mechanical analysis |
| 本文献已被 维普 等数据库收录！ |
|
