| TC4合金切削有限元模拟动态本构模型的建立 |
| |
| 引用本文： | 叶玉刚,尹燕. TC4合金切削有限元模拟动态本构模型的建立[J]. 兵器材料科学与工程, 2009, 32(6) |
| |
| 作者姓名： | 叶玉刚 尹燕 |
| |
| 作者单位： | 中北大学,机械工程及自动化学院,山西,太原,030051;宁波鄞州区职业教育中心,浙江,宁波,315100 |
| |
| 摘 要： | 用多元函数的下山单纯形法对切削实验所得Johnson-Cook模型中的5个参数进行优化,并应用大型商用有限元软件Marc,建立高速切削有限元模型,通过有限元迭代分析,得到较高精度的高速切削Johnson-Cook本构方程,经验证,该本构方程可以大大提高模拟计算的精度。
|
| 关 键 词： | TC4钛合金 动态本构模型 切削 有限元模拟 |
Establishing dynamic constitutive model of finite element simulation for TC4 alloy cutting |
| |
| YE Yugang,YIN Yan. Establishing dynamic constitutive model of finite element simulation for TC4 alloy cutting[J]. Ordnance Material Science and Engineering, 2009, 32(6) |
| |
| Authors: | YE Yugang YIN Yan |
| |
| Abstract: | The down hill optimization methods was used to optimize the five parameters in the Johnson-Cook model obtained from cutting experiments. And the finite element model of high speed cutting was established by using large commercial finite element software Marc. Then higher precision constitutive equation for high speed cutting was obtained by using the iterative finite element analysis. After being verified by cutting experiments and finite element simulation, the constitutive equation can greatly enhance the accuracy of simulation. |
| |
| Keywords: | TC4 titanium alloy dynamic constitutive model cutting finite element simulation |
| 本文献已被 万方数据 等数据库收录！ |
|
