首页 | 本学科首页   官方微博 | 高级检索  
     

纳米炭黑改性涂料在NaCl溶液中的耐蚀机理研究
引用本文:张卫国,李林,姚素薇,郑国钦.纳米炭黑改性涂料在NaCl溶液中的耐蚀机理研究[J].中国腐蚀与防护学报,2005,25(6):351-355.
作者姓名:张卫国  李林  姚素薇  郑国钦
作者单位:天津大学化工学院应用化学系杉山表面技术研究室,天津,300072
基金项目:天津市自然科学基金项目(033602411)
摘    要:在超声场作用下,将接枝改性及缩醛化反应制备的油溶性纳米炭黑粒子(24nm~300nm)加入到普通油漆中,获得了纳米炭黑复合涂料.浸泡腐蚀实验、阳极极化及交流阻抗(EIS)测试结果表明,纳米炭黑改善了涂料在NaCl溶液中的耐蚀性,炭黑含量为1mass%时,复合涂料耐蚀性最佳.通过EIS谱图、透射电镜(TEM)等研究了纳米炭黑改性涂料在NaCl溶液中的耐蚀机理.

关 键 词:纳米炭黑  涂料  NaCl溶液  耐蚀机理
文章编号:1005-4537(2005)06-0351-05
收稿时间:2005-03-01
修稿时间:2005-03-01

CORROSIVE MECHANISM OF PAINT COATINGS MODIFIED BY CARBON BLACK NANOPARTICLES IN NaCl SOLUTION
ZHANG Weiguo,LI Lin,YAO Suwei,ZHENG Guoqin.CORROSIVE MECHANISM OF PAINT COATINGS MODIFIED BY CARBON BLACK NANOPARTICLES IN NaCl SOLUTION[J].Journal of Chinese Society For Corrosion and Protection,2005,25(6):351-355.
Authors:ZHANG Weiguo  LI Lin  YAO Suwei  ZHENG Guoqin
Affiliation:SUGIYAMA Laboratory of Surface Technology, School of Chemical Engineering and Technology, Tianjin University, Tianjin 300072
Abstract:In ultrasonic field,nanocomposite coating was got by adding oil-soluble carbon black nanoparticles synthesized by surface graft modification into paint.SPM image and TEM picture showed that the particle size was about 24 nm to 300 nm and dispersed uniformly in coatings.Immersion corrosion testing,anodic polarization and electrochemical impedance spectroscopy(EIS) were employed to study the corrosion behavior of nanocomposite coating.The results indicated that the anti-corrosion performance of composite coating in NaCl solution was improved.The composite coating with 1mass% carbon black nanoparticles had the best corrosion resistance,and the corrosive mechanism was studied by EIS and TEM.
Keywords:carbon black nanoparticle  paint  NaCl solution  corrosive mechanism
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号