首页 | 本学科首页   官方微博 | 高级检索  
     

有效接地系统中变电所的接地设计探讨
引用本文:张卓为,王向平.有效接地系统中变电所的接地设计探讨[J].电力勘测设计,2010(6).
作者姓名:张卓为  王向平
作者单位:浙江省电力设计院;华东电力设计院;
摘    要:110kV~500kV系统常采用有效接地系统,110kV及220kV系统中变压器中性点直接接地或经低阻抗接地,部分变压器中性点也可不接地;330kV及500kV系统中不允许变压器中性点不接地运行。文章对有效接地和低电阻接地系统中的变电所接地要求加以梳理,并结合工程实例对变电所的接地设计进行了分析探讨,结合国家电网公司"两型一化"变电站设计建设导则,提炼出变电所接地设计的主要考虑思路及解决方案。

关 键 词:有效接地  直接接地  低阻抗接地  两型一化  二次系统

Exploration of Substation Earthing Design in Effective Earthing System
ZHANG Zhuo-wei,WANG Xiang-ping.Exploration of Substation Earthing Design in Effective Earthing System[J].Electric Power Survey & Design,2010(6).
Authors:ZHANG Zhuo-wei  WANG Xiang-ping
Affiliation:ZHANG Zhuo-wei,WANG Xiang-ping(1.Zhejiang Electric Power Design Institute,Hangzhou 310014,China,2.East China Electric Power Design Institute,Shanghai 200063,China)
Abstract:The effective earthing system has been popularly used in 110kV~500kV system,the neutral-point direct earthing or low-resistance earthing has been used for 110kV and 220kV transformers while no earthing for some of transformers is also available;the neutral-point no-earthing operation is not permitted for 330kV and 500kV transformers.This article try to clarify the related requirements for the substation earthing in effective erarthing and low-resistance earthing system by incorporating some exact project cases and the so-called "Two types and one mode" design guide for substation stipulated by State Grid,and figure out some thinking and solution methods.
Keywords:effective earthing  direct earthing  low-resistance earthing  peak value  sub-corner mesh potential  two types and one mode  current branching  secondary system    
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号