| 烧结终点位置的模糊控制 |
| |
| 引用本文： | 郗安民,刘晓超.烧结终点位置的模糊控制[J].冶金设备,2000(1):19-21,10. |
| |
| 作者姓名： | 郗安民 刘晓超 |
| |
| 作者单位： | 北京科技大学!100083 |
| |
| 摘 要： | 运用模糊控制理论研制出烧结终点位置模糊控制模型。提出了前馈－反馈控制方法。反馈控制采用二维参数自校正模糊控制器，前馈控制采用单输入单输出模糊控制器，最终用查表法求出控制参量，用于适时调节烧结机的速度，稳定烧结终点位置，提高烧结矿质量。
|
| 关 键 词： | 烧结机 终点位置 模糊控制 前馈-反馈 |
Developed the Fuzzy Control of Sintering Burning - through - point |
| |
| Xi Anmin, Liu Xiaochao, Liu Ying.Developed the Fuzzy Control of Sintering Burning - through - point[J].Metallurgical Equipment,2000(1):19-21,10. |
| |
| Authors: | Xi Anmin Liu Xiaochao Liu Ying |
| |
| Affiliation: | Beijing University of Science and Technology |
| |
| Abstract: | Developed the fuzzy control model of sintering burning-through-point with fuzzy theo ry, and put forward the feedforward-feedback fuzzy control method. Two dimensions self - adaptive fuzzy controller is used in the feedback-control, while single-input-single-output fuzzy controller is adopted in the feedforward-control. The overall control parameter acting on the velocity of sintering machine can be found with look-into-table method. That result in stable burning-through-point and high quality. |
| |
| Keywords: | Sintering machine burn-through-point Fuzzy control Feedforward - feedback |
| 本文献已被 CNKI 维普 等数据库收录！ |
