|
|||||
|
|
| 等径角挤压制备CuCrZr合金的抗软化性能 | |
| 引用本文： | 石凤健,王雷刚,王海龙,汪建敏.等径角挤压制备CuCrZr合金的抗软化性能[J].材料热处理学报,2009,30(6). |
| 作者姓名： | 石凤健 王雷刚 王海龙 汪建敏 |
| 作者单位： | 1. 江苏大学材料科学与工程学院,江苏,镇江,212013;江苏科技大学材料科学与工程学院,江苏,镇江,212003 2. 江苏大学材料科学与工程学院,江苏,镇江,212013 3. 江苏科技大学材料科学与工程学院,江苏,镇江,212003 |
| 基金项目： | 国家自然科学基金，江苏大学科技创新团队项目 |
| 摘 要： | 研究了CuCrZr合金等径角挤压(ECAP)后的微观组织演变及软化温度.结果表明,固溶态CuCrZr合金经路线B_c(每挤一道次后试样沿同一方向旋转90°)等径角挤压10道次后组织细化至亚微米级,超细晶晶粒较为等轴、均匀.等径角挤压10道次后合金的软化温度约为530℃,但550℃时,合金的硬度仍高达161HV,这说明ECAP后合金的抗软化能力并没有降低.因为ECAP促进了时效时析出相的析出,使得析出相更为弥散、细小,从而提高了合金的力学性能. |
| 关 键 词： | 等径角挤压 CuCrZr合金 软化温度 超细晶 |
Softening resistance of CuCrZr alloy fabricated by equal channel angular pressing |
|
| SHI Feng-jian,WANG Lei-gang,WANG Hai-long,WANG Jian-min.Softening resistance of CuCrZr alloy fabricated by equal channel angular pressing[J].Transactions of Materials and Heat Treatment,2009,30(6). | |
| Authors: | SHI Feng-jian WANG Lei-gang WANG Hai-long WANG Jian-min |
| Abstract: | Microstrueture evolution and softening temperature of CuCrZr alloy after equal channel angular pressing (ECAP) were investigated. The results show that the grains of solid-solutioned CuCrZr alloy are refined to sub micrometer level after ECAP for l0 passes with route Bc (the sample is rotated sequentially by 90 °around its axis). The uhra-fine grains are more equiaxed and homogeneous. The softening temperature is about 530℃, however, vickers hardness even remains 161HV at 550℃ for the 10 passes ECAPed sample, which indicates that the softening resisitance of CuCrZr alloy does not decrease after ECAP. It is argued that the precipitation of dispersed and fine precipitates is accelerated by the ECAP and thus mechanical properties of the alloy are improved. |
| Keywords: | equal channel angular pressing CuCrZr alloy softening temperature ultra-fine grains |
| 本文献已被 万方数据 等数据库收录！ | |