大型结构件涂装输送新技术

在新建大型结构件涂装线上,为了避免输送线转弯半径过大的问题,在输送线平行的导轨之间,不再采用“U”形弯轨进行连续运行,而是采用空中平移行车将工件、吊具及自行小车等转轨.采用平移行车后,输送导轨不再是连续的,而是独立平行的.由于不需要考虑转弯半径,因此车间内设备容纳能力增加,设备布置优化,提高了车间的有效利用率.

Novel transportation technology for coating large structural parts

To avoid the too large swerve radius in a new large structural parts coating line,an overhead parallel travelling crane is applied to orbit changing of workpiece,lifting tool and automatic vehicle between the parallel guideways in transportation line instead of U-type orbit.After using parallel travelling crane,the transportation guideway is not continuous but independent by parallel.The equipment capacity in workshop is increased and the equipment layout is optimized due to the inexistence of swerve radius,and the effective utilization of workshop is improved.