双层基片集成波导双通带滤波器设计 |
| |
引用本文: | 程孝奇,李国辉,鉴浩,吴昊,郑新元. 双层基片集成波导双通带滤波器设计[J]. 电子元件与材料, 2013, 32(4) |
| |
作者姓名: | 程孝奇 李国辉 鉴浩 吴昊 郑新元 |
| |
作者单位: | 上海大学特种光纤与光接入网省部共建重点实验室,上海,200072 |
| |
基金项目: | 上海市重点学科建设资助项目,上海市科委重点实验室资助项目 |
| |
摘 要: | 根据频率变换法的双通带滤波器综合理论,采用矩形基片集成波导谐振腔作为基本谐振单元,通过谐振器之间直接耦合设计了一种双层结构的双通带基片集成波导滤波器,利用Ansoft HFSS建立滤波器模型并进行全波仿真。仿真结果表明,两个通带内回波损耗均大于20 dB,插入损耗小于0.5 dB,通带之间的阻带衰减特性良好,同时其尺寸压缩了约50%,较好地实现了滤波器的小型化,满足了工程需要的技术指标。
|
关 键 词: | 双通带滤波器 频率变换 基片集成波导 谐振腔 仿真 模型 |
Design of dual-passband filter with double-layer substrate integrated waveguide |
| |
Abstract: | Based on the synthesis theory of dual-passband filters with frequency transformation method,a dual-passband substrate integrated waveguide(SIW)filter with a two-layer structure was designed by using a rectangular substrate integrated waveguide cavity as the basic resonant unit through direct coupling between the resonators.The proposed filter model with full-wave simulation was built in Ansoft HFSS.The simulation results show that both return losses of two pass-bands are higher than 20 dB,while the insertion loss is less than 0.5 dB with its good attenuation characteristic between two pass-bands.The dimensions are reduced almost 50%,where filter miniaturization is achieved.The filter meets the needs of engineering technical simultaneously. |
| |
Keywords: | dual-passband filter frequency transformation substrate integrated waveguide resonant cavity simulation model |
本文献已被 万方数据 等数据库收录! |
|