| 碟簧液压操动机构的建模与仿真 |
| |
| 引用本文： | 雷琴,王永良,李宁,刘煜. 碟簧液压操动机构的建模与仿真[J]. 液压与气动, 2015, 0(1): 92-95. DOI: 10.11832/j.issn.1000-4858.2015.01.021 |
| |
| 作者姓名： | 雷琴 王永良 李宁 刘煜 |
| |
| 作者单位： | 平高集团有限公司， 河南平顶山467000 |
| |
| 摘 要： | 在AMESim中建立了220 kV断路器所配碟簧液压操动机构的液压系统仿真模型，分析空载条件下的动态特性，得到电磁铁电流、断路器行程、分闸缓冲腔压力、分闸时间和分闸速度的结果，与实测结果对比吻合度好，证明系统仿真模型的准确性。
|
| 关 键 词： | 220kV 碟簧液压操动机构 AMESim 仿真 |
| 收稿时间： | 2014-04-23 |
Modeling and Simulation of Hydraulic Spring Operating Mechanism |
| |
| LEI Qin,WANG Yong-liang,LI Ning,LIU Yu. Modeling and Simulation of Hydraulic Spring Operating Mechanism[J]. Chinese Hydraulics & Pneumatics, 2015, 0(1): 92-95. DOI: 10.11832/j.issn.1000-4858.2015.01.021 |
| |
| Authors: | LEI Qin WANG Yong-liang LI Ning LIU Yu |
| |
| Affiliation: | Pinggao Group Co., Ltd., Pingdingshan, Henan467000 |
| |
| Abstract: | The simulation model of the whole hydraulic system of hydraulic operating mechanism with a disc spring for the 220 kV circuit breaker is built in AMESim. Using this model, the dynamic results without load is obtained, such as the current of solenoid of valve, the displacement of circuit breaker, the buffering pressure in piston chamber, and the operating time and operating rate. These results are accordant with the measuring results, which proves that the model is very precise. |
| |
| Keywords: | |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《液压与气动》浏览原始摘要信息 |
|
点击此处可从《液压与气动》下载全文 |
|
