Synthesis of castable sodium zirconium phosphate monoliths employing reactions between zirconyl nitrate hydrate and condensed phosphates

Reactions between zirconyl nitrate hydrate and condensed phosphates can be used to produce castable low CTE sodium zirconium phosphate (NZP) monoliths. Reaction between sodium nitrate, zirconyl nitrate hydrate and condensed phosphoric acid at room temperature (alkali nitrate method) produces monoliths having a heterogeneous microstructure, which are multiphasic in appearance. Except for the presence of crystalline sodium nitrate, they are X-ray amorphous. Differential thermal analysis revealed two distinct exothermic crystallization events when these materials are heated. The first event, with an onset temperature of 650°C, is the result of NZP and ZrO₂crystallization. The second is the result of ZrP₂O₇ crystallization. Reaction between zirconyl nitrate hydrate and condensed sodium phosphate (condensed alkali phosphate method) results in a more homogeneous microstructure in which crystalline zirconium hydrogen phosphate hydrate and sodium nitrate are present. Two exothermic peaks, with onset temperatures of approximately 570 and 860°C, are observed. The first exotherm is the result of NZP, ZrO₂ and ZrP₂O₇ crystallization; the second exotherm is the result of a further NZP formation. After heating materials made by these two methods at 940°C for 24 h, the condensed-alkali-phosphate-method-derived material converted to phase-pure NZP, while the alkali-nitrate-method-derived material contained ZrP₂O₇. The differences in phase evolution between the materials prepared by these two methods are attributable to the differences in chemical and microstructural homogeneity that result from the reactants used. This revised version was published online in September 2006 with corrections to the Cover Date.