首页 | 本学科首页   官方微博 | 高级检索  
     

304L不锈钢晶间腐蚀的临界电位
引用本文:方智,吴荫顺,孙冬柏,李久青,江光,崔在明.304L不锈钢晶间腐蚀的临界电位[J].腐蚀科学与防护技术,1995,7(4):332-335.
作者姓名:方智  吴荫顺  孙冬柏  李久青  江光  崔在明
作者单位:北京科技大学表面科学与腐蚀工程系,北京核安全中心
摘    要:敏化态304L不锈钢在0.5mol/LH2SO4+10(-3)mol/LCH3CSNH2溶液中晶间腐蚀存在两个敏感电位区间,一个是活化-钝化过渡电位区,另一个敏感电位区间的晶间腐蚀的临界电位值是1040mV(SCE),高于这个电位值,材料对晶间腐蚀敏感.用恒电位法可以评价材料晶间腐蚀的倾向,恒电位实验法测量的电流和电流-时间曲线的斜率越大,材料的晶间腐蚀倾向越大.

关 键 词:不锈钢  晶间腐蚀  恒电位
收稿时间:1995-07-25
修稿时间:1995-07-25

THE CRITICAL POTENTIAL FOR INTERGRANULAR CORROSION OF 304 STAINLESS STEEL
FANG Zhi, WU Yinshun, LI Jiuqing, SUN Dongbai.THE CRITICAL POTENTIAL FOR INTERGRANULAR CORROSION OF 304 STAINLESS STEEL[J].Corrosion Science and Protection Technology,1995,7(4):332-335.
Authors:FANG Zhi  WU Yinshun  LI Jiuqing  SUN Dongbai
Abstract:There are two potential ranges for 304L stainless steel sensitive to intergranular corrosion in 0.5mol / LH2SO4+10(-3)mol/L CH3CSNH2 solution. One is active-passive transitive potential range, the critical potential for the other is 1040mV(SCE). The material is sensitive to intergranular corrosion at potentials above this value. The susceptibility to intergranular corrosion of 304L stainless steel can be judged by potentic-static method. The bigger the current density andthe slope of current density-time curves at a certain potential, the more susceptive to intergranularcorrosion.
Keywords:stainless steel  intergranular corrosion  potentio-static  
本文献已被 CNKI 维普 等数据库收录!
点击此处可从《腐蚀科学与防护技术》浏览原始摘要信息
点击此处可从《腐蚀科学与防护技术》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号