| 光固化支架套注塑模具设计 |
| |
| 引用本文： | 汪菊英.光固化支架套注塑模具设计[J].工程塑料应用,2009,37(11). |
| |
| 作者姓名： | 汪菊英 |
| |
| 作者单位： | 广东白云学院机电工程系,广州,510450 |
| |
| 摘 要： | 通过分析光固化支架套的使用要求和结构特点,用Pro/E分模的方法完成了光固化支架套的注塑模具设计,阐述了该模具分型面的选择、浇注系统和成型零件的设计、侧抽芯机构的设计及有关计算。生产实践证明,该模具结构简单紧凑,工作可靠,操作方便,成型的塑料件质量好。
|
| 关 键 词： | 注塑模具 分型面 成型零件 抽芯机构 |
DESIGN OF INJECTION MOULD FOR LIGHT-CURED FRAME SUPPORTING SET |
| |
| Wang Juying.DESIGN OF INJECTION MOULD FOR LIGHT-CURED FRAME SUPPORTING SET[J].Engineering Plastics Application,2009,37(11). |
| |
| Authors: | Wang Juying |
| |
| Affiliation: | Electro-Mechanical Department;Guangdong Baiyun University;Guangzhou 510450;China |
| |
| Abstract: | By analyzing operation requirement and structure characteristic of light-cured frame supporting set,Pro/E was used for part surface design.The parting surface,pouring system,mould part and core-pulling mechanism were designed.The practice proved that the injection mould was compact in structure,credible and easy in operation,and the quality of plastics produced by this mould was good. |
| |
| Keywords: | injection mould parting surface mould part core-pulling mechanism |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
