| 单体对 UV-LED 喷墨油墨性能影响的研究 |
| |
| 引用本文： | 易青,王琪,魏先福,黄蓓青.单体对 UV-LED 喷墨油墨性能影响的研究[J].包装工程,2014,35(7):127-132. |
| |
| 作者姓名： | 易青 王琪 魏先福 黄蓓青 |
| |
| 作者单位： | 南京林业大学 江苏省制浆造纸科学与技术重点实验室, 南京 210037;北京印刷学院, 北京 102600;南京林业大学 江苏省制浆造纸科学与技术重点实验室, 南京 210037;北京印刷学院, 北京 102600;北京印刷学院, 北京 102600 |
| |
| 摘 要： | 目的研究单体对UV-LED喷墨油墨性能的影响并改善油墨性能。方法选用不同单体分别制备油墨样品,测试色浆的分散性及油墨的黏度、表面张力、双键转换率、柔韧性和附着力,并采用配方实验方法设计复合单体配方,得到油墨综合性能最佳时混合单体的比例。结果色浆配方中复合单体最优质量比为mNPGDA∶mTMPTA=0.54∶0.46时,色浆分散性最优;油墨配方中复合单体的最优质量比为mTPGDA∶mTMPTA=0.61∶0.39时,油墨综合性能最优。结论单体对UV-LED喷墨油墨的分散性及固化速度有显著影响,对油墨固化后成膜性能影响也较大。
|
| 关 键 词： | 单体 UV-LED喷墨油墨 性能 配方实验 |
| 收稿时间： | 2013/8/25 0:00:00 |
| 修稿时间： | 4/1/2014 12:00:00 AM |
Effect of Monomer on UV-LED Inkjet Ink Performance |
| |
| YI Qing,WANG Qi,WEI Xian-fu and HUANG Bei-qing.Effect of Monomer on UV-LED Inkjet Ink Performance[J].Packaging Engineering,2014,35(7):127-132. |
| |
| Authors: | YI Qing WANG Qi WEI Xian-fu and HUANG Bei-qing |
| |
| Affiliation: | Nanjing Forestry University, Jiangsu Provincial Key Lab of Pulp and Paper Science and Technology,Nanjing 210037, China;Beijing Institute of Graphic Communication, Beijing 102600, China;Nanjing Forestry University, Jiangsu Provincial Key Lab of Pulp and Paper Science and Technology,Nanjing 210037, China;Beijing Institute of Graphic Communication, Beijing 102600, China;Beijing Institute of Graphic Communication, Beijing 102600, China |
| |
| Abstract: | Objective To investigate the impact of monomer on UV-LED inkjet ink performance and improve ink performance. Methods Different monomers were used to prepare ink samples, and the dispersivity, viscosity, surface tension, curing rate, flexibility and adhesion of ink were tested. In the end, the optimal ratio of co-monomers was achieved by formulation experiment to obtain the best overall performance. Results The ink paste showed the optimal dispersivity when the mass ratio of co-monomers was mNPGDA: mTMPTA = 0. 54 : 0. 46, and the ink showed the optimal overall performance when the mass ratio of co -monomers was mTPGDA : mTMPTA = 0. 61 : 0. 39. Conclusion Monomer had a significant influence on the dispersion and curing rate of UV-LED inkjet ink, and also had a great impact on ink film-forming properties after UV-LED curing. |
| |
| Keywords: | monomer UV-LED inkjet ink performance formulation experiment |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《包装工程》浏览原始摘要信息 |
|
点击此处可从《包装工程》下载全文 |
|
