| 直齿圆柱齿轮精锻成形工艺及三维有限元模拟 |
| |
| 引用本文： | 张清萍,赵国群,栾贻国,王广春. 直齿圆柱齿轮精锻成形工艺及三维有限元模拟[J]. 塑性工程学报, 2003, 10(1): 13-15,19 |
| |
| 作者姓名： | 张清萍 赵国群 栾贻国 王广春 |
| |
| 作者单位： | 山东大学南校区模具工程技术研究中心,济南,250061 |
| |
| 摘 要： | 本文在齿轮分流锻造法的基础上 ,提出了闭式模锻———向内分流法两步成形的直齿圆柱齿轮的精锻工艺方案。采用三维刚塑性有限元法模拟了此工艺的成形过程 ,并且和传统的闭式模锻工艺进行了比较分析。从模拟结果可以看出 ,两步成形工艺不仅工作载荷低 ,而且齿形充填良好 ,是适用于直齿圆柱齿轮精锻的有效工艺方案。
|
| 关 键 词： | 直齿圆柱齿轮 精锻 三维有限元模拟 分流法 |
| 文章编号： | 1007-2012(2003)01-0013-03 |
Precision forging of spur gear using three-dimensional finite element analysis |
| |
| ZHANG Qing|ping ZHAO Guo|qun LUAN Yi|guo WANG Guang|chun. Precision forging of spur gear using three-dimensional finite element analysis[J]. Journal of Plasticity Engineering, 2003, 10(1): 13-15,19 |
| |
| Authors: | ZHANG Qing|ping ZHAO Guo|qun LUAN Yi|guo WANG Guang|chun |
| |
| Abstract: | A two|stage precision forging process of spur gears is developed according to the divided flow method in this paper,which includes closed die forging process and inside divided flow method.3D rigid|plastic FEM is used to simulate the forging process in detail.Compared with the conventional closed die forging,the simulation results show that completely filled gear teeth are obtained using a lower forging load by the two|stage forging method which is the effective forging process for manufacturing of spur gears. |
| |
| Keywords: | spur gear precision forging 3D FEM divided flow method |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
