|
|||||
|
|
| 碳纤维和二硫化钼混杂增强尼龙复合材料的摩擦学性能研究 | |
| 引用本文： | 王军祥,顾明元,朱真才,葛世荣,刘维民.碳纤维和二硫化钼混杂增强尼龙复合材料的摩擦学性能研究[J].复合材料学报,2003,20(2):13-18. |
| 作者姓名： | 王军祥 顾明元 朱真才 葛世荣 刘维民 |
| 作者单位： | 1. 上海交通大学,金属基复合材料国家重点实验室,上海,200030 2. 中国矿业大学,机电与材料工程学院,江苏,徐州,221008 3. 中国科学院,兰州化学物理研究所,固体润滑国家重点实验室,甘肃,兰州,730000 |
| 基金项目： | 国家自然科学基金资助项目(50071031)，中科院兰州化学物理研究所固体润滑国家重点实验室开放基金资助项目(9910) |
| 摘 要： | 以注塑成型法制备MoS2和碳纤维混杂增强尼龙1010复合材料,采用MM-200型磨损试验机考察复合材料摩擦磨损性能。研究结果表明:在干摩擦条件下,MoS2和碳纤维混杂可显著改善尼龙复合材料摩擦学性能,较小载荷下复合材料磨损以轻微磨粒磨损和疲劳磨损为主,较高载荷下复合材料则以热疲劳断裂剥落磨损为主。摩擦过程中MoS2和对偶铁发生摩擦化学反应,生成和对偶底材具有较强结合能力的硫化亚铁和硫酸铁等,同时部分被氧化生成MoO3。 |
| 关 键 词： | 尼龙1010复合材料 碳纤维 二硫化钼 摩擦学性能 |
| 文章编号： | 1000-3851(2003)02-0013-06 |
| 收稿时间： | 2001-09-19 |
| 修稿时间： | 2001年9月19日 |
TRIBOLOGICAL PROPERTIES OF HYBRID CARBON FIBER AND MoS2 REINFORCED POLYAMIDE 1010 COMPOSITES |
|
| WANG Junxiang,GU Mingyuan,ZHU Zhencai,GE Shirong,LIU Weimin.TRIBOLOGICAL PROPERTIES OF HYBRID CARBON FIBER AND MoS2 REINFORCED POLYAMIDE 1010 COMPOSITES[J].Acta Materiae Compositae Sinica,2003,20(2):13-18. | |
| Authors: | WANG Junxiang GU Mingyuan ZHU Zhencai GE Shirong LIU Weimin |
| Affiliation: | 1. State Key Laboratory of MMCs,Shanghai Jiaotong University, Shanghai 200030,China; 2. School of Mechatronic and Materials Engineering, China University of Mining and Technology, Xuzhou 221008, China; 3. State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000, China |
| Abstract: | All specimens of MoS2 and carbon fiber reinforced polyamide 1010(PA1010) composites were prepared by a micro injection machine. The friction coefficient and wear rate of composites were investigated with the ring-block test rig. The results show that hybrid fillers can considerably improve the tribological properties of PA1010 composites under dry sliding friction conditions. The dominant wear mechanisms of composites were abrasive wear and fatigue wear at a low normal pressure; the fatigue cracking and peeling due to thermal effect resulted in the severe wear of composites with the increase of normal pressure. The tribochemical reactions between MoS2 and counterface Fe were found to generate FeS2 and FeSO4 which were more effective to promote the adhesive strength to the counterpart, and also MoS2 was partially oxidized to MoO3 during sliding. |
| Keywords: | polyamide 1010 composite carbon fiber MoS_2 tribological properties |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |
| 点击此处可从《复合材料学报》浏览原始摘要信息 | |
| 点击此处可从《复合材料学报》下载全文 | |