Combined DSC and Pulse-Heating Measurements of Electrical Resistivity and Enthalpy of Platinum,Iron, and Nickel

Measurements of the enthalpy, electrical resistivity, and specific heat capacity as a function of temperature starting from the solid state up into the liquid phase for Fe, Ni, and Pt are presented. Two different measurement approaches have been used within this work: an ohmic pulse-heating technique, which allows – among others – the measurement of enthalpy, specific heat capacity, and electrical resistivity up to the end of the stable liquid phase, and a differential–scanning–calorimetry technique (DSC) which enables determination of specific heat capacity from near room temperature up to 1500 K. The microsecond ohmic pulse-heating technique uses heating rates up to 10⁸ K·s^–1 and thus is a dynamic measurement, whereas the differential–scanning–calorimetry technique uses heating rates of typically 20 K·min^–1 and can be considered as a quasi-static process. Despite the different heating rates both methods give good agreement of the thermophysical data within the stated uncertainties of each experiment. Results on the metals Fe, Ni, and Pt are reported. The enthalpy and resistivity data are presented as a function of temperature and compared to literature values.