| 基于CAN/LIN总线的智能车身控制系统设计 |
| |
| 引用本文： | 郭峰,赵璇,汪颖.基于CAN/LIN总线的智能车身控制系统设计[J].武汉理工大学学报(信息与管理工程版),2011(5):705-707,720. |
| |
| 作者姓名： | 郭峰 赵璇 汪颖 |
| |
| 作者单位： | 武汉理工大学信息工程学院; |
| |
| 摘 要： | 针对目前集中式车身控制系统的不足,设计了一种基于CAN/LIN总线混合网络的车身控制系统。将MCP2551、MCP201分别作为CAN/LIN总线的收发器,以MC9S12XDG128作为主控芯片实现网关控制功能,通过该网关实现CAN/LlN网络通信交互。另外对组合开关模块信号采用LIN总线传输,实现车身控制系统的总线化、模块化。并结合某主机厂实际应用需求,对系统进行低功耗和故障自诊断设计,构建了一套安全性较高的车身网络控制系统。
|
| 关 键 词： | 车身控制系统 CAN/LIN总线 诊断仪 |
Design of Intelligent Automotive Control System Based on CAN/LIN Bus |
| |
| GUO Feng,ZHAO Xuan,WANG Ying :Postgraduate,School of Information Engineering,WUT,Wuhan ,China..Design of Intelligent Automotive Control System Based on CAN/LIN Bus[J].Journal of Wuhan University of Technology(Information & Management Engineering),2011(5):705-707,720. |
| |
| Authors: | GUO Feng ZHAO Xuan WANG Ying :Postgraduate School of Information Engineering WUT Wuhan China |
| |
| Affiliation: | GUO Feng,ZHAO Xuan,WANG Ying :Postgraduate,School of Information Engineering,WUT,Wuhan 430070,China. |
| |
| Abstract: | Aiming at many kinds of shortcomings existed in current automotive control system,a hybrid network control system based on CAN/LIN bus was designed.The MCP2551,MCP201 were used as CAN/LIN bus transceiver,respectively.MC9S12XDG128 as the gateway makes CAN/LIN network interactive communication possible.In addition,the combination switch module signals were transported via LIN bus to achieve the bus and modular of the automotive control system.Finally,taking the practical application demands of an ODM into acc... |
| |
| Keywords: | body control system CAN/LIN bus diagnostic |
| 本文献已被 CNKI 等数据库收录！ |
|
