| 基于UG&VERICUT整体式叶轮五轴数控加工与仿真 |
| |
| 引用本文： | 陈文涛,夏芳臣,涂海宁.基于UG&VERICUT整体式叶轮五轴数控加工与仿真[J].组合机床与自动化加工技术,2012(2):102-104. |
| |
| 作者姓名： | 陈文涛 夏芳臣 涂海宁 |
| |
| 作者单位： | 南昌大学机电工程学院,南昌,330031 |
| |
| 摘 要： | 论文研究了整体叶轮的五轴数控加工工艺,在UG中创建叶轮的三维模型,并使用CAM模块分别对叶轮流道面和叶片生成刀具轨迹,经后置处理器生成NC文件.基于VERICUT构建了DOOSAN VMD600五轴加工中心仿真环境,通过模拟整个机床加工过程,验证了数控加工程序和后处理器的正确性,从而缩短生产周期,降低成本.
|
| 关 键 词： | 整体叶轮 五轴加工 仿真 VERICUT |
Five-Axis NC Machining and Simulation of Integral Impeller base on UG&VERICUT |
| |
| CHEN Wen-tao
,
XIA Fang-chen
,
TU Hai-ning.Five-Axis NC Machining and Simulation of Integral Impeller base on UG&VERICUT[J].Modular Machine Tool & Automatic Manufacturing Technique,2012(2):102-104. |
| |
| Authors: | CHEN Wen-tao XIA Fang-chen TU Hai-ning |
| |
| Affiliation: | (School of Mechanical and Electrical Engineering,Nanchang University,Nanchang 330031,China) |
| |
| Abstract: | This paper studies the five axis NC machining technology of integral impeller,creates 3D model of the impeller based on UG,Separately create tool paths for the impeller passage and impeller blade,produced the NC program file by postprocessor.Constructed DOOSAN VMD600 five-axis machining center based on VERICUT,through simulating the whole machine processing process,verify correctness of the NC machining program and the postprocessor,so as to shorten the production cycle and reduce the cost. |
| |
| Keywords: | integral impeller five-Axis machining simulation VERICUT |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
