首页 | 本学科首页   官方微博 | 高级检索  
     

拉伸对异形聚丙烯腈原丝截面形状的影响
引用本文:武永涛,曾小梅,赵炯心,房奕,潘鼎.拉伸对异形聚丙烯腈原丝截面形状的影响[J].合成纤维工业,2007,30(3):17-19.
作者姓名:武永涛  曾小梅  赵炯心  房奕  潘鼎
作者单位:东华大学纤维材料改性国家重点实验室,上海,200051
摘    要:研究了湿法和于湿法纺制异形聚丙烯腈(PAN)纤维过程中拉伸对纤维截面形状的影响。结果表明:喷丝头拉伸对湿法纺制的PAN初生纤维截面影响明显,随着喷丝头拉伸倍数的增大,纤维异形度逐渐增大;喷丝头拉伸对于湿法纺制的纤维截面形状和异形度影响较小;沸水拉伸对二者的纤维截面形状和异形度几乎无影响。

关 键 词:聚丙烯腈纤维  异形纤维  拉伸  喷丝板  截面
文章编号:1001-0041(2007)03-0017-03
修稿时间:2006-09-152007-11-15

Effect of stretch on cross-section shape of non-circular polyacrylonitrile fiber
Wu Yongtao,Zeng Xiaomei,Zhao Jiongxin,Fang Yi,Pan Ding.Effect of stretch on cross-section shape of non-circular polyacrylonitrile fiber[J].China Synthetic Fiber Industry,2007,30(3):17-19.
Authors:Wu Yongtao  Zeng Xiaomei  Zhao Jiongxin  Fang Yi  Pan Ding
Affiliation:State Key Laboratory for Chemical Fibers Modification and Polymer Materials, Donghua University, Shanghai 200051
Abstract:The effect of stretch on the cross-section shape of polyacrylonitrile (PAIN) fiber was studied during the process of wet spinning and dry wet spinning. The results showed that the jet-stretch had an evident effect on the cross-section shape of PAN fiber prepared by wet spinning process, and the profile degree of the fiber was raised gradually with the increase of jet-stretch ratio. The jet-stretch had a slight effect on the cross-section shape and the profile degree of PAN fiber prepared by dry wet spinning process. The boiling water stretch had little effect on the cross-section shape and profile degree of the fillers prepared by these two processes.
Keywords:polyacrylonitrile fiber  non-circular fiber  stretch  spinneret  cross section
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号