首页 | 本学科首页   官方微博 | 高级检索  
     

双P型及W型辐射管系统性能分析及测试
引用本文:程奇伯,王宏宇,冯霄红.双P型及W型辐射管系统性能分析及测试[J].金属热处理,2021,46(3):234-238.
作者姓名:程奇伯  王宏宇  冯霄红
作者单位:1.重庆赛迪热工环保工程技术有限公司, 重庆 401122; 2.中冶赛迪技术研究中心有限公司, 重庆 401122
摘    要:对W型和双P型辐射管加热系统的烧嘴结构及燃烧方式进行了分析,对比测试了两种辐射管加热系统的烟气循环率、管壁温度均匀性、燃料利用率、NOx等关键技术指标。结果表明,双P型辐射管燃烧系统管壁温度均匀性更好,节能效果显著,且可以采用更大的烧嘴功率,减少辐射管加热系统和控制模块的数量,降低投资成本,具有较大的推广应用价值。

关 键 词:辐射管  功率  温度分布  燃料利用  NOx排放  
收稿时间:2020-10-20

Performance analysis and test of D-P type and W type radiant tube system
Cheng Qibo,Wang Hongyu,Feng Xiaohong.Performance analysis and test of D-P type and W type radiant tube system[J].Heat Treatment of Metals,2021,46(3):234-238.
Authors:Cheng Qibo  Wang Hongyu  Feng Xiaohong
Affiliation:1. CISDI Thermal & Environmental Engineering Co., Ltd., Chongqing 401122, China; 2. CISDI Research & Development Co., Ltd., Chongqing 401122, China
Abstract:Burner structures and combustion modes of W-type radiant tube system and dual P-type radiant tube system were analyzed,and the key performance indicators of the two kinds of radiant tube heating systems were tested and compared,including flue gas circulation rate,temperature deviation,fuel efficiency and NOx.The results show that the dual P-type radiant tube combustion system has greater value of popularization and application,because it has better uniformity of tube wall temperature,remarkable energy saving effect,and the ability to use higher power burner to reduce the number of heating system and control module and to reduce the investment cost.
Keywords:radiant tube  power  temperature distribution  fuel efficiency  NOxdischarge
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《金属热处理》浏览原始摘要信息
点击此处可从《金属热处理》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号