Analytical studies of four-inch pipe whip tests under BWR LOCA conditions |
| |
Authors: | Shuzo Ueda Ryoichi Kurihara Noriyuki Miyazaki Toshikuni Isozaki |
| |
Affiliation: | Department of Nuclear Safety Research, Japan Atomic Energy Research Institute, Tokai-mura, Naka-gun, Ibaraki-ken, Japan |
| |
Abstract: | The purpose of pipe rupture studies in JAERI is to perform model tests on pipe whip, restraint behavior, jet impingement and jet thrust force, and to establish a computational method for analyzing these phenomena. This report presents the analytical results of 4-inch pipe whip tests under BWR LOCA conditions.Dynamic response analyses were performed using the general-purpose finite element program ADINA. The test pipe was modelled by straight beam elements and the four restraints were modelled by a single truss element. The analytical results were compared with the experimental results. Impact time and maximum total restraint force showed good agreement with experimental results. On the other hand, pipe strain and pipe deflection could not be predicted so well. The reason for this is that the sliding of the restraint during the pipe whip movement cannot be considered in the analyses. |
| |
Keywords: | |
本文献已被 ScienceDirect 等数据库收录! |
|