首页 | 本学科首页   官方微博 | 高级检索  
     

重整重芳烃油烯烃选择性加氢催化剂的研究
引用本文:何龙,高俊斌,姚志龙. 重整重芳烃油烯烃选择性加氢催化剂的研究[J]. 工业催化, 2012, 20(1): 39-43. DOI: 10.3969/j.issn.1008-1143.2012.01.008
作者姓名:何龙  高俊斌  姚志龙
作者单位:1.北京化工大学,北京 100029;2.北京石油化工学院恩泽生物质精细化工实验室,北京 102617
摘    要:研究了负载在Al2O3载体上的贵金属钯基催化剂对重整重芳烃油选择性加氢脱烯烃反应的性能。以重整残余重芳烃油为原料,分别对催化剂载体、贵金属负载量和助剂添加量进行考察。结果表明,700 ℃焙烧混有2%Ni的γ-Al2O3和负载0.2%的贵金属Pd综合效果最理想。催化剂稳定性结果表明,催化剂在500 h能保证产品溴指数在200 mg-Br·(100g)-1以下,原料中萘环的损失在2%以下。

关 键 词:催化剂工程  重整重芳烃  烯烃  选择性加氢  载钯催化剂  

Research on olefin selective hydrogenation catalyst for reforming heavy aromatic oil
HE Long , GAO Junbin , YAO Zhilong. Research on olefin selective hydrogenation catalyst for reforming heavy aromatic oil[J]. Industrial Catalysis, 2012, 20(1): 39-43. DOI: 10.3969/j.issn.1008-1143.2012.01.008
Authors:HE Long    GAO Junbin    YAO Zhilong
Affiliation:1.Bejing University of Chemical Technology, Bejing 100029, China; 2.Enze Biomass Fine Chemicals Laboratory, Beijing Institute of Petrochemical Technology, Bejing 102617, China
Abstract:The performance of palladium supported catalysts for selective hydrogenation and deolefin of reforming heavy aromatic oil was studied. The catalyst supports, loadings of noble metal and the additive were investigated using the reforming residual heavy aromatic oil as the raw material. The results showed that the catalyst with the loadings of 2% Ni and 0.2% Pd on y-A1203 and calcined at 700 ℃ exhibited ideal catalytic properties. The experimental results of the catalyst stability indicated that the product bromine index of less than 200 mg-Br · ( 100 g) -1 and the loss of naphthalene ring of less than 2% in the raw material were attained over the catalyst within 500 h.
Keywords:catalyst engineering  reforming heavy aromatics  olefin  selective hydrogenation  palladiumsupported catalyst
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《工业催化》浏览原始摘要信息
点击此处可从《工业催化》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号