| LY12大直径薄壁筒错距旋压工艺参数的优化计算 |
| |
| 引用本文： | 赵宪明 张利军. LY12大直径薄壁筒错距旋压工艺参数的优化计算[J]. 塑性工程学报, 1995, 2(4): 40-45 |
| |
| 作者姓名： | 赵宪明 张利军 |
| |
| 作者单位： | 哈尔滨工业大学，北京二三九厂 |
| |
| 摘 要： | 本文对影响大直径薄壁筒错距旋压件质量的工艺参数进行了分析，运用优化设计理论对主要工艺参数进行了优化计算，用修正的优化计算结果对ＬＹ１２大直径薄壁筒进行了错距旋压工艺实验，得到了较好的结果。
|
| 关 键 词： | 大直径薄壁筒，错距旋压，工艺参数优化 |
OPTIMUM CALCULATION OF TECHNICAL PARAMETERS ON STAGGER SPINNING OF LY12 TUBE WITH BIG￣DIAMETER AND THIN-WALL |
| |
| Zhao Xianming, Lu Yan, Li Kezhi, Xue Kemin. OPTIMUM CALCULATION OF TECHNICAL PARAMETERS ON STAGGER SPINNING OF LY12 TUBE WITH BIG￣DIAMETER AND THIN-WALL[J]. Journal of Plasticity Engineering, 1995, 2(4): 40-45 |
| |
| Authors: | Zhao Xianming Lu Yan Li Kezhi Xue Kemin |
| |
| Affiliation: | Zhao Xianming; Lu Yan; Li Kezhi; Xue Kemin (Harbin Institute of Technology 150001)Zhang Lijun; Teng Yun; Chao Keyong (Bejing Hang Xing Machine Menufacture Company 100013) |
| |
| Abstract: | In this pater, the technical parameters affecting the quality of stagger spinning parts of LY12 tube with big--diameter and thin--wall are analyzed. The main parameters are computed by optimization design theory. On this basis, the test are made with modified optimum calculation results, and the satisfying results are obtained. |
| |
| Keywords: | big--diameter and thin--wall tube stagger spinning optimization of technical parameters |
| 本文献已被 CNKI 维普 等数据库收录！ |
