| 液压机工作缸缸底部分几种常见结构力学模型的统一 |
| |
| 引用本文： | 郭宝锋,任运来.液压机工作缸缸底部分几种常见结构力学模型的统一[J].塑性工程学报,1995,2(2):46-50. |
| |
| 作者姓名： | 郭宝锋 任运来 |
| |
| 作者单位： | 燕山大学 |
| |
| 摘 要： | 本文根据缸壁对于缸底弯曲变形具有一定支承刚度的概念，为法兰支承式液压缸四种常见的缸底结构建立了统一的力学模型和强度设计方法。
|
| 关 键 词： | 液压机，液压缸，强度 |
A UNITED MECHANICS MODEL OF USUAL CYLINDER BOTTOM FORMS IN HYDRAULIC PRESS |
| |
| Guo Baofeng, Ren Yunlai.A UNITED MECHANICS MODEL OF USUAL CYLINDER BOTTOM FORMS IN HYDRAULIC PRESS[J].Journal of Plasticity Engineering,1995,2(2):46-50. |
| |
| Authors: | Guo Baofeng Ren Yunlai |
| |
| Affiliation: | Yanshan University Qinhuangdao 066004 |
| |
| Abstract: | ased on the conception that cylinder wall has a certain supporting rigidity against botlom deformations, a united mechanics model and its strength criterion for the strength analysis and calculation of usualbotlom forms are established in this paper. |
| |
| Keywords: | hydraulic press hydraulic cylinder strength |
| 本文献已被 CNKI 维普 等数据库收录！ |
