FDY高强聚酯长丝生产技术研究 |
| |
引用本文: | 谢崇秀,黄凯.FDY高强聚酯长丝生产技术研究[J].合成纤维工业,1993,16(1):10-15. |
| |
作者姓名: | 谢崇秀 黄凯 |
| |
摘 要: | 较系统地研究了 PET 切片的固相缩聚工艺、高粘度切片的熔融纺丝以及拉伸卷绕工艺.研究结果表明:采用国内 TPA 法生产的 PET 大有光切片,选择合理的固相缩聚工艺,可满足高强聚酯长丝的生产需要;在切片固相缩聚过程中,对粘度增长贡献的大小依次为:真空度>温度>时间;无油丝粘度在0.92dL/g 左右,聚酯纤维可获得优良的物理机械性能和良好的热稳定性.
|
关 键 词: | PET 高强丝 固相缩聚 FDY |
STUDY ON THE PRODUCING TECHNOLOGY OF HIGH TENACITY PET FILAMENT BY FDY PROCESS |
| |
Abstract: | The solid-state polycondensation process of PET chips,the spinning technology of high viscosity chipsand the draw-winding technology were systematically studied.The results were shown that the high tenaci-ty PET filament could be produced by choicing proper polycondensation process and using local PET brightchips by TPA way.In the solid-state polycondensation process of PET chips,the contribution to chips vis-cosity increasement was in following order:vacuum,temperature and time.When the viscosity of oil-freeyarn was about 0.92dL/g,the obtained PET filament might have excellent physical properties and good heatstability. |
| |
Keywords: | PET High tenacity filament FDY solid—state polycondensation |
本文献已被 维普 等数据库收录! |
|