| 汽车副架液压胀形预成形工艺设计的数值模拟 |
| |
| 引用本文： | 雷丽萍,方刚,曾攀,张慧玲. 汽车副架液压胀形预成形工艺设计的数值模拟[J]. 塑性工程学报, 2002, 9(2): 76-78 |
| |
| 作者姓名： | 雷丽萍 方刚 曾攀 张慧玲 |
| |
| 作者单位： | 清华大学机械工程系,北京,100084 |
| |
| 摘 要： | 对汽车副架液压胀形预成形工艺设计进行了数值模拟研究。应用建立在刚塑性有限元法 (FEM)基础上的HydroFORM 3D软件与Oyane延性断裂准则相结合的数值模拟方法 ,重点针对管料初始尺寸的确定 ,给出了汽车副架液压胀形预成形工艺的数值模拟结果。分析表明 ,确定适合预成形工艺条件的管材初始尺寸有利于汽车副架液压胀形工艺的实施
|
| 关 键 词： | 液压胀形 FEM 预成形 汽车副架 数值模拟 |
| 修稿时间： | 2001-10-18 |
Numerical modeling of pre-forming process design in hydroforming automobile subframe |
| |
| LEI Li|ping FANG Gang ZENG Pan ZHANG Hui|ling. Numerical modeling of pre-forming process design in hydroforming automobile subframe[J]. Journal of Plasticity Engineering, 2002, 9(2): 76-78 |
| |
| Authors: | LEI Li|ping FANG Gang ZENG Pan ZHANG Hui|ling |
| |
| Abstract: | Numerical analysis of pre|forming process design is proposed in hydroforming automobile subframe.By using the software HydroFORM|3D based on rigid|plastic finite element method (FEM) and Oyane's fracture criterion,a modeling approach is put forth,and the theoretical result of pre|forming process design is presented which is mainly referred to the determination of the initial tube size.The theoretical analysis shows that the suitable initial tube size for the pre|forming process condition is favourable to perform a good hydroforming process of automobile subframe. |
| |
| Keywords: | hydroforming FEM pre|forming automobile subframe numerical modeling |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
