Comparisons of TEHL Simulations of Newtonian Fluids in Line Contacts between the 3D FEM and the Reynolds Equation–Based Approaches*

Thermoelastohydrodynamic lubrication (TEHL) analysis of line or point contacts is usually done by simultaneously and numerically solving the Reynolds equation, the Boussinesq equation of an elastic semi-infinite body, the energy conservation equation, and the load balance equation. Although a number of publications are available in this field, there is still a lack of general-purpose and widely used TEHL software for engineering applications. On the other hand, commercial software for both the solid structure and fluid flow analyses have become easy design tools. To expand the application of the commercial software to TEHL simulation, coupling of structure and fluid analyses is required. This study gives some demonstrations of the 3D finite element method (FEM) simulations of line contact TEHL problems using ANSYS version 13.0. The equilibrium equations of momentum and continuity and the energy conservation equation of lubricating fluids are solved with CFX. The elastic deformation of solids is calculated with the ANSYS Structure module. Through the fluid–solid coupling interfaces, the fluid pressure, solid deformation, and thermal flow are transferred between the fluid and solid domains. The computational fluid domain is enlarged, enclosing the contact zone, in the 3D model. Further, the 3D model can treat the realistic constraint conditions of solid deformation, whereas conventional TEHL analysis uses the assumption of semi-infinite body. The simulation results for pressure, lubricant film thickness, and temperature distributions are compared with the traditional Reynolds approach, and reasonable agreement for pressure and film thickness distributions has been obtained.