首页 | 本学科首页   官方微博 | 高级检索  
     

不锈钢焊缝缺陷的超声相控阵扫描图像特征分析
引用本文:陈振华,谢长鸿,郭文光,卢超.不锈钢焊缝缺陷的超声相控阵扫描图像特征分析[J].失效分析与预防,2014,9(3):146-150.
作者姓名:陈振华  谢长鸿  郭文光  卢超
作者单位:1.无损检测技术教育部重点实验室(南昌航空大学), 南昌 330063
基金项目:国家自然科学基金(11104129);无损检测技术教育部重点实验室开放基金(zD201()29001)
摘    要:采用超声相控阵检测方法对预制了夹杂和气孔缺陷的奥氏体不锈钢焊缝进行检测,分析了缺陷的相控阵图像与A扫描信号特征。试验采用的是超声相控阵扇型扫查方式,同时用深度定标方法对仪器参数进行了优化,对缺陷的位置及尺寸进行测量并获得了能够判断缺陷类型的图像特征和A信号特征。研究结果表明:超声相控阵方法不但适用于不锈钢焊缝的检测,且具备更大的检测范围及更丰富的检测信息;通过检测图像特征及相关的A信号特征能够对这2类缺陷的位置及类型进行有效评价。

关 键 词:超声相控阵  不锈钢焊缝  缺陷  图像特征
收稿时间:2014-01-20
修稿时间:2014-04-30

Characteristic Analysis on Ultrasonic Phased Array Image of Defects in Stainless Steel Weld
CHEN Zhen-hua,XIE Chang-hong,GUO Wen-guang,LU Chao.Characteristic Analysis on Ultrasonic Phased Array Image of Defects in Stainless Steel Weld[J].Failure Analysis and Prevention,2014,9(3):146-150.
Authors:CHEN Zhen-hua  XIE Chang-hong  GUO Wen-guang  LU Chao
Affiliation:1.Key Laboratory of Nondestructive (Ministry of Education), Nanchang Hongkong University, Nanchang 330063, China
Abstract:Ultrasonic phased array technique is adopted to detect inclusion and void which prefabricated in stainless steel weld, and both the testing image and the related A - scan signal characters are analyzed. Scallop scan are used in the experiment, and the testing parameters are adjusted with thickness calibrating course. The results show that ultrasonic phased array technique can be used to measure the defect' s location and dimension, which also possess the advantages of more testing range and rich testing information. In conclusion, the image and signal characters which can be use to distinguished inclusion and void are obtained.
Keywords:ultrasonic phased array technique  stainless steel weld  defect  image characters
本文献已被 CNKI 维普 等数据库收录!
点击此处可从《失效分析与预防》浏览原始摘要信息
点击此处可从《失效分析与预防》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号