首页 | 本学科首页   官方微博 | 高级检索  
     

球谐函数波束形成声源识别扩展方法
引用本文:褚志刚,杨洋,贺岩松,康润程,王光建.球谐函数波束形成声源识别扩展方法[J].机械工程学报,2015,51(20):45-53.
作者姓名:褚志刚  杨洋  贺岩松  康润程  王光建
作者单位:1.重庆大学机械传动国家重点实验室 重庆 400044;
2.重庆大学汽车工程学院 重庆 400044;
3.重庆工业职业技术学院车辆工程学院 重庆 401120;
4.国家汽车质量监督检验中心 襄阳 441004
基金项目:国家自然科学基金资助项目(51275540,51275538)
摘    要:球阵列波束形成是一种有效的三维空间声源识别技术,已有的球谐函数波束形成方法虽然能够准确定位声源,但无法定量声源的声学贡献,且声源识别结果受聚焦距离影响显著。通常,各声源对阵列中心处的声压贡献是声源排序评价的有效依据,为准确计算该声压贡献,提出球谐函数波束形成扩展方法,探究聚焦距离对计算准确性的影响规律。针对已知声源的模拟仿真结果表明,该方法不仅能够准确定位声源,而且能够准确计算声源声压贡献,3 000 Hz以下频段的最大误差不超过0.5 dB,3 000~6 000 Hz频段的最大误差不超过1.5 dB,且准确性几乎不受聚焦距离的影响。扬声器声源试验证明了模拟计算的正确性及该方法在实际应用中的有效性。

关 键 词:波束形成  球阵列  声压贡献  声源识别  

Extension Method of Spherical Harmonics Beamforming for Sound Source Identification
CHU Zhigang,YANG Yang,HE Yansong,KANG Runcheng,WANG Guangjian.Extension Method of Spherical Harmonics Beamforming for Sound Source Identification[J].Chinese Journal of Mechanical Engineering,2015,51(20):45-53.
Authors:CHU Zhigang  YANG Yang  HE Yansong  KANG Runcheng  WANG Guangjian
Affiliation:1.The State Key Laboratory of Mechanical Transmission, Chongqing University, Chongqing 400044;
2.College of Automotive Engineering, Chongqing University, Chongqing 400044;
3.Faculty of Vehicle Engineering, Chongqing Industry Polytechnic College, Chongqing 401120;
4National Center of Quality Supervision & Inspection of Vehicles, Xiangyang 441004
Abstract:Beamforming with a spherical array is an effective 3D sound source identification technology. The existed spherical harmonics beamforming can locate sound sources accurately, but it fails to quantify the acoustical contributions of sound sources, and that its results are affected by the focus distance seriously. Usually, pressure contribution each sound source makes to the array centre is an effective basis in ranking sound sources. In order to calculate the pressure contribution, an extension method of spherical harmonics beamforming is proposed and the influence rule of focus distance on the accuracy of the method is explored. Simulations of the given sound sources show that the method can not only locate sound sources but also calculate sound pressure contributions accurately. Concretely, the maximum error is less than 0.5 dB up to 3 000 Hz and less than 1.5 dB in 3 000-6 000 Hz. In addition, the accuracy of the method is hardly affected by the focus distance. Finally, experiment with loudspeaker sound sources validates correctness of the simulations and effectiveness of the method in practical applications.
Keywords:beamforming  sound pressure contribution  sound source identification  spherical array  
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《机械工程学报》浏览原始摘要信息
点击此处可从《机械工程学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号