| 柱塞偶件卡滞故障影响因素分析 |
| |
| 引用本文： | 张帆. 柱塞偶件卡滞故障影响因素分析[J]. 湖南工业职业技术学院学报, 2007, 7(4): 12-13 |
| |
| 作者姓名： | 张帆 |
| |
| 作者单位： | 无锡商业职业技术学院机电工程系,江苏,无锡,214153 |
| |
| 摘 要： | 对影响某型号高泵端压力喷油泵柱塞偶件卡滞问题的几个重要因素进行了分析,并进行了必要的试验,根据试验结果,从结构受力、选材、使用等方面采取了措施,对柱塞卡滞故障提出了可行的解决方案。
|
| 关 键 词： | 喷油泵 柱塞偶件 卡滞故障 |
| 文章编号： | 1671-5004(2007)04-0012-02 |
| 修稿时间： | 2007-11-02 |
Analysis of Plurger Matching Parts Failure |
| |
| ZHANG Fan. Analysis of Plurger Matching Parts Failure[J]. Journal of Hunan Industry Polytechnic, 2007, 7(4): 12-13 |
| |
| Authors: | ZHANG Fan |
| |
| Abstract: | The most important factor that causes plunger matching parts failure of injection pump on the high pump end was analyzed in this paper,and the necessary tests was done.Auording to the results of the tests,the corresponding measures were taken,and a workable solution was presented to resolve the plunger matching parts failure. |
| |
| Keywords: | fuel injection pump plunger matching parts failure |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
