首页 | 本学科首页   官方微博 | 高级检索  
     

轴流泵端壁区域流动三维粘性数值计算
引用本文:陈次昌,杨昌明,王金诺,宋文武,季全凯.轴流泵端壁区域流动三维粘性数值计算[J].西华大学学报(自然科学版),2003,22(Z2):3-5.
作者姓名:陈次昌  杨昌明  王金诺  宋文武  季全凯
作者单位:1. 西华大学校长办公室
2. 西华大学机械工程与自动化系,四川,成都,610039
3. 西南交通大学机械工程研究所,四川,成都,610031
4. 西华大学能源与环境工程系,四川,成都,610039
基金项目:本文为国家自然科学基金支助项目(NO:59979017).
摘    要:本文作者采用通用流场分析软件FLUENT,基于N-S方程,选用RNG k-ε湍流模型与SIMPLEC算法,对轴流泵叶轮内部(及端壁间隙)流动进行了三维粘性数值计算.通过实验验证,表明数值计算结果和实测数据吻合较好.详细分析了叶顶附近流场形态以及叶轮出口轴向、周向速度分布,进行了性能预估.并给出了实验装置图.

关 键 词:轴流泵  数值计算  间隙流动
文章编号:1000-5722(2003)增刊-0003-03
修稿时间:2003年8月12日

Three-Dimensional Viscous Numerical Simulation of End-Wall Flow of Axial Flow Pump
CHEN Ci-chang,YANG Chang-ming,WANG Jin-nuo,SONG Wen-wu,JI Quan-kai.Three-Dimensional Viscous Numerical Simulation of End-Wall Flow of Axial Flow Pump[J].Journal of Xihua University:Natural Science Edition,2003,22(Z2):3-5.
Authors:CHEN Ci-chang  YANG Chang-ming  WANG Jin-nuo  SONG Wen-wu  JI Quan-kai
Affiliation:CHEN Ci-chang~1,YANG Chang-ming~2,WANG Jin-nuo~3,SONG Wen-wu~4,JI Quan-kai~4
Abstract:In this paper,the blade tip clearance flow in axial-flow pump is simulated based on three-dimensional N-S equations,RNG turbulence model,and SIMPLEC algorithm.It shows that numerical results agree well with experiment data through validation.Flow fields near the blade tip and velocity distribution at the exit of rotor are analyzed in detail,and performance of the axial now rotor is predicted.Experimental equipment is also introduced in this paper.
Keywords:axial-now pump  numerical computation  clearance flow
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号