In vitro bonding of adhesive resin to dental alloys and dentine

The purpose of this in vitro investigation was to compare the shear bond strength of sandblasted, tin-plated and metal primed Type II gold alloy bonded to Ni-Cr alloy, as well as sandblasted Type II gold bonded to dentine, using two different adhesive resin cements. All bonding surfaces were treated with C&B-Metabond (Parkell, CB) or Imperva Dual (Shofu, ID), according to the manufacturers' instructions. In all, 20 sandblasted, 20 tin-plated and 20 metal-primed gold cylinders were bonded to Ni-Cr, and 20 sandblasted gold cylinders bonded to dentine. Bonds were stressed to failure using a shear load in an Instron testing machine. Data were calculated, statistically analysed (ANOVA and Student-t-test), and the fracture sites examined in a SEM. The CB and ID systems demonstrated significantly higher bond strengths (p < 0.01) when the gold was tin-plated, but CB demonstrated significantly lower bond strengths (p < 0.01) when the gold was pre-treated with metal primer. CB always demonstrated significantly higher metal (p < 0.01) and dentine (p < 0.05) bond strengths than ID.