| Abstract: | Oil film thickness in hydrodynamic bearings is a fundamental parameter influencing overall hydrodynamic bearing performance. Knowledge of this thickness allows bearing performance to be optimised. For the small hydrodynamic bearings that are usually used in laboratory test facilities, a very small sensor (e.g.,<2 mm) is required because of space limitations. Commercially available eddy‐current and capacitance sensors are too large to be mounted in the pad of such a bearing. An alternative approach is to use sensors based on optical methods, such as the optic lever technique. The main idea in this technique is to detect the intensity of a light beam reflected from a target surface. This intensity is a function of the distance between the sensor and the target. This paper reports the specific features of the optic lever technique as used for measurements of oil film thickness. The design, calibration procedure, and main characteristics of an optical sensor are discussed. A test rig for the calibration of oil film thickness sensors is also presented. The sensor response curve has two parts, linear and non‐linear; using the linear part results in high sensitivity in the micrometre range. The influence of different types of oil on the output signal of the sensor has also been investigated. Experiments with different target velocities have shown that this sensor can be used for accurate and reliable measurement of oil film thickness in hydrodynamic bearings. |
