Wear and friction behaviour of CaCO3 nanoparticles used as additives in lubricating oils

For some years, reports have been published on adding solid lubricant powder to oil to improve the tribological properties of the latter, but the results have not been satisfactory. In this paper, we describe the preparation of CaCO₃ nanoparticles in a microemulsion consisting of sodium dodecyl‐sulphate (SDS)/isopentanol/cyclohexane/water, and assessment of the tribological behaviour of CaCO₃ nanoparticles as additives for lubricating oils. The CaCO₃ nanoparticles were characterised by transmission electron microscopy (TEM), and their tribological performance was tested in a four‐ball machine; the rubbing surface was analysed with X‐ray photoelectron microscopy (XPS). The results indicate that the size of CaCO₃ nanoparticles increased with the concentration of aqueous reactant, and that CaCO₃ nanoparticles exhibited good load‐carrying capacity, antiwear and friction‐reducing properties. The tribological properties of lubricating oils could be improved significantly by dispersing CaCO₃ nanoparticles in 500SN base oil containing dispersants such as polyisobutene‐butanediimide (T154), calcium alkylsulphonate (T101) and methyl‐tricaprylamine chloride (aliquat 336). The improvements in friction and wear were concluded to be due to the formation of a film containing CaCO₃ and CaO in the rubbing region, and the presence of nanoparticles, which may act in the same way as ball bearings, to facilitate sliding.