| 基于机器视觉的二维尺寸检测 |
| |
| 引用本文： | 谢俊,吴荥荥,朱广韬,王路路.基于机器视觉的二维尺寸检测[J].工具技术,2017,51(1):98-100. |
| |
| 作者姓名： | 谢俊 吴荥荥 朱广韬 王路路 |
| |
| 作者单位： | ;1.江苏大学 |
| |
| 摘 要： | 借助CMOS工业相机、光学镜头、计算机以及Open CV等搭建了一套机器视觉检测简易系统,采用了一种针对两孔零件的测量方法。经试验得出:精度可达0.009mm,重复性误差可达0.0215mm,用该系统测量已检测合格的300个零件,满足检测要求,说明该检测系统具有一定的可行性。
|
| 关 键 词： | 机器视觉 图像处理 标定 特征检测 |
Two-Dimensional Size Detection Based on Machine Vision |
| |
| Xie Jun,Wu Yingying,Zhu Guangtao,Wang Lulu.Two-Dimensional Size Detection Based on Machine Vision[J].Tool Engineering(The Magazine for Cutting & Measuring Engineering),2017,51(1):98-100. |
| |
| Authors: | Xie Jun Wu Yingying Zhu Guangtao Wang Lulu |
| |
| Abstract: | A simple machine vision system was built by using COMS camera,optical lenses,computer and OpenCV software in order to design a method for measuring the two-hole part.Experimental results show that the measuring accuracy of the system is up to 0.009mm and the repeat accuracy is controlled within 0.0215mm,the tested 300 parts were measured by the system which meets the requirement of testing and proves the certain feasibility. |
| |
| Keywords: | machine vision image processing calibration feature detection |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
