| 选择性激光烧结方法加工仿生支架的工艺研究 |
| |
| 引用本文： | 吴懋亮,周克平. 选择性激光烧结方法加工仿生支架的工艺研究[J]. 中国制造业信息化, 2006, 35(3): 35-38 |
| |
| 作者姓名： | 吴懋亮 周克平 |
| |
| 作者单位： | 1. 上海电力学院,动力工程系,上海,200090
2. 上海大学,机自学院,上海,200072 |
| |
| 摘 要： | 在利用选择性激光烧结技术加工仿生支架过程中,加工参数(包括激光功率、扫描速度、扫描间距)是影响成形质量的重要因素,通过调整加工参数可以使成形零件内部保持一定的孔隙,从而产生支架内部微孔结构。正交试验方法可以科学地安排和分析多种因素的影响,从而优化加工参数,最终获得具有较高孔隙率的仿生支架。
|
| 关 键 词： | 选择性激光烧结 支架 正交试验 参数 |
| 文章编号： | 1672-1616(2006)03-0035-04 |
| 修稿时间： | 2005-10-17 |
Process of the Scaffolds Fabrication with Selective Laser Sintering |
| |
| WU Mao-liang,ZHOU Ke-ping. Process of the Scaffolds Fabrication with Selective Laser Sintering[J]. Manufacture Information Engineering of China, 2006, 35(3): 35-38 |
| |
| Authors: | WU Mao-liang ZHOU Ke-ping |
| |
| Abstract: | The parameters influence the parts quality in the process of scaffolds fabrication with selective laser sintering (SLS), including laser power, scanning speed and scanning space. It keeps porous in the parts by adjusting the parameters, and finally produces the scaffolds with the interconnected pores. Orthonormal test scientifically arranges and analyzes the influencing factors, so it optimizes the parameters to obtain bionic scaffolds with high porosity. |
| |
| Keywords: | Selective Laser Sintering Scaffold Orthogonal Test Parameter |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
