Nanoimprint glass-like carbon molds fabricated with ECR oxygen ion beams using polysiloxane oxide mask |
| |
Authors: | S Kiyohara S Araki Y Kurashima Y Taguchi Y Sugiyama Y Omata |
| |
Affiliation: | (1) Electric and Control System Engineering Course, Faculty of Advanced Engineering, Maizuru National College of Technology, 234 Aza Shiroya, Maizuru, Kyoto 625-8511, Japan;(2) Department of Mechanical Systems Engineering, University of Yamanashi, 4-3-11 Takeda, Kofu, Yamanashi 400-8511, Japan;(3) Application and Technical Section, ELIONIX INC, 3-7-6 Motoyokohama, Hachioji, Tokyo 192-0063, Japan |
| |
Abstract: | We have investigated the nanofabrication for glass-like carbon molds with electron cyclotron resonance oxygen ion beam etching
technologies using polysiloxane -R2SiO-]n as an electron beam mask and a room-temperature imprint resist material. The maximum etching selectivity of polysiloxane
film against glass-like carbon was 27, which was obtained with ion energy of 400 eV. It was found that the optimum etching
time to fabricate dots of 500 nm in height was 5 min, which was explored according to the computer simulation. The glass-like
carbon molds with square pole and cylinder dots were fabricated with 500 nm in width and diameter, respectively. The optimum
imprinting pressure and its depth obtained after the press for 5 min were 0.5 MPa and 0.5 μm, respectively. We carried out
the room-temperature nanoimprint lithography process using glass-like carbon molds. The resulting width of imprinted polysiloxane
patterns was obtained in good agreement with that of the mold. |
| |
Keywords: | |
本文献已被 SpringerLink 等数据库收录! |
|