| 凝固进程中平板铸件的变形机制与计算模型 |
| |
| 引用本文： | 郑贤淑,亓锋,金俊泽. 凝固进程中平板铸件的变形机制与计算模型[J]. 金属学报, 2003, 39(9): 948-951 |
| |
| 作者姓名： | 郑贤淑 亓锋 金俊泽 |
| |
| 作者单位： | 大连理工大学铸造工程研究中心,大连,116024 |
| |
| 基金项目： | 高等学校博士点基金2000014117，国家自然科学基金59995442资助项目 |
| |
| 摘 要： | 在平板铸件中截取杆状试件进行变形实验，根据各种工艺条件下变形曲线均呈光滑平坦的抛物线形状的规律，提出了挠曲变形机制的二阶近似微分方程及其离散模型。结果表明，凝固进程中所形成的热弯矩M及铸件的抗弯刚度EJ是形成挠曲变形的主要原因，计算结果与实验结果一致，为预测铸件变形、优化铸造工艺提供了经济、有效的方法。
|
| 关 键 词： | 凝固进程 变形 挠度 热弯矩 抗弯刚度 |
| 文章编号： | 0412-1961(2003)09-0948-04 |
| 修稿时间： | 2002-10-08 |
DEFORMATION MECHANISM AND CALCULATION MODEL OF PLATE CASTING IN SOLIDIFICATION |
| |
| ZHENG Xianshu,QI Feng,JIN JunzeResearch Center of Foundry Engineering,Dalian University of Technology,Dalian. DEFORMATION MECHANISM AND CALCULATION MODEL OF PLATE CASTING IN SOLIDIFICATION[J]. Acta Metallurgica Sinica, 2003, 39(9): 948-951 |
| |
| Authors: | ZHENG Xianshu QI Feng JIN JunzeResearch Center of Foundry Engineering Dalian University of Technology Dalian |
| |
| Affiliation: | ZHENG Xianshu,QI Feng,JIN JunzeResearch Center of Foundry Engineering,Dalian University of Technology,Dalian 116024 |
| |
| Abstract: | Based on deformation experiments of beam sample cut from a plate casting, the relationship between varions effect factors and deformation was investigated, and the results show that warping curve is a smooth parabola. An approximate quadratic differential equation and its discrete model are proposed. The model indicates that the key factors leading to the deflection deformation are the thermal bending moment M and the flexural rigidity EJ formed in solidification process. The consistency between the numerical and experimental results proves the proposed method to be economical and effective to predict the casting deformation and finally optimize the foundry technology. |
| |
| Keywords: | solidification deformation deflection thermal bending moment flexural rigidity |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
